|
 |
 |
| The unit will be activated by one of the separate light switch/remote room switches (not supplied). When the light/remote switch is turned off the unit will continue to run at high speed for 1-25 minutes, dependant on the timer adjustment. The fan will then switch itself off. |
|
 |
| The unit is designed to operate continuously at low speed. High speed is activated by one of the separate light switch/remote room switched (not supplied). The integral timer will operate after the light/remote switch is turned off. At the end of the time delay period (adjustable up to 25 minutes), the fan will return to continuous low speed. |
|
Installation
The unit should be installed within the loft space and can be mounted on ceiling joists the bracket supplied, or wall mounted on one of the gable ends.
Interconnection to the main unit and the 3 extract points is through 100mm flexible ducting and 3 adjustable airvents mounted on the ceiling of the room(s) to be ventilated (not supplied).
Extract from the central unit, can be made through the roof, gable end wall or soffit as required.
Extract is via 100mm flexible or rigid ducting and suitable termination point. |
|
|
|
|
|
|
